04 – EQUIPMENT AND ACCESSORIES
SHOVEL REPLACEMENT OR REPLACEMENT OF OTHERACCESSORIES PREPARED FOR
QUICK FITTING
SHOVEL ASSEMBLY
1
– Go to the shovel lying on the roundas shown
in the diagram, turn the quick fit device
forward and turn the attachment lever to the
outside.
2
– When the shovel has been attachedraise the
lifting arms so that the shovel moves away
from the ground and turn the attachment
device backwards allowing the shovel to rest
on its base.
3
– Turn the levers inwards to block the shovel
on the attachment base.
SHOVEL RELEASE
To release the shovel proceed as follows:
1. Rest the shovel on the ground
2. Open the attachment lever
3.Turn the quick fit device forward until the hovel is released from its seat and then remove the
shovel.
The mounting and disassembling procedure is to be repeated with any type of equipment
authorised by the Manufacturer with the exclusion of special equipment whose mounting and
disassembling procedure will be delivered with the accessory.
Page
29
of
61
Item – Rev(s):
8009641121– 101
Содержание ST11
Страница 1: ...OPERATION MAINTENANCE MANUAL Compact Track Loader ST11 Item 8009641121 Revision Date 101 March 2022...
Страница 16: ...CONTROL AND AUXILIARY INSTRUMENTS CONTROL PANEL Fig 1 17 Page 16 of 61 Item Rev s 8009641121 101...
Страница 60: ...MAINTENANCE NOTES HOURS WORKED DATE WORK DONE PARTS CONCERNED Page 60 of 61 Item Rev s 8009641121 101...
Страница 61: ...MAINTENANCE NOTES HOURS WORKED DATE WORK DONE PARTS CONCERNED Page 61 of 61 Item Rev s 8009641121 101...
