Wacker Neuson RD 7 Series Скачать руководство пользователя страница 23

Страница: 23 / 168

RD 7

Operation

wc_tx000294gb.fm

Operation

4.1

Preparing the Machine for First Use

Preparing for first use

To prepare your machine for first use:

4.1.1

Make sure all loose packaging materials have been removed from the

machine.

4.1.2

Check the machine and its components for damage. If there is visible

damage, do not operate the machine! Contact your Wacker Neuson

dealer immediately for assistance.

4.1.3

Take inventory of all items included with the machine and verify that

all loose components and fasteners are accounted for.

4.1.4

Attach component parts not already attached.

4.1.5

Add fluids as needed and applicable, including fuel, engine oil, and

battery acid.

4.1.6

Move the machine to its operating location.

Содержание RD 7 Series









































































































































































Результаты поиска

Содержание RD 7 Series

Отзывы:

Похожие инструкции для RD 7 Series

Бренды по названию

Популярные бренды

Wacker Neuson RD 7 Series, Руководство оператора

Результаты поиска

Содержание RD 7 Series

Отзывы:

Похожие инструкции для RD 7 Series

Бренды по названию

Популярные бренды