Wacker Neuson RD 7 Series Скачать руководство пользователя страница 9

Страница: 9 / 168

RD 7

Safety Information

wc_si000115gb.fm

Safety Information

1.1

Signal Words Used in this Manual

This manual contains DANGER, WARNING, CAUTION,

NOTICE,

and

NOTE signal words which must be followed to reduce the possibility
of personal injury, damage to the equipment, or improper service.

NOTICE:

Used without the safety alert symbol, NOTICE indicates a

situation which, if not avoided, could result in property damage.

Note:

A Note contains additional information important to a procedure.

This is the safety alert symbol. It is used to alert you to potential personal hazards.

Obey all safety messages that follow this symbol.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death

or serious injury.

To avoid death or serious injury from this type of hazard, obey all safety messages that
follow this signal word.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

To avoid possible death or serious injury from this type of hazard, obey all safety mes-
sages that follow this signal word.

CAUTION!

CAUTION indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

To avoid possible minor or moderate injury from this type of hazard, obey all safety mes-
sages that follow this signal word.

Содержание RD 7 Series









































































































































































Результаты поиска

Содержание RD 7 Series

Отзывы:

Похожие инструкции для RD 7 Series

Бренды по названию

Популярные бренды

Wacker Neuson RD 7 Series, Руководство оператора

Результаты поиска

Содержание RD 7 Series

Отзывы:

Похожие инструкции для RD 7 Series

Бренды по названию

Популярные бренды