Wacker Neuson RC50, Инструкция по эксплуатации

Страница: 86 / 222

Operation
Starting the machine
86 BA RC50_RC70 en 00
3.15 Starting the machine
Requirement: Fill levels for the operating materials, for example fuel,
water etc., are adequate.
Before starting the machine, check all functions and settings (see
"Function tests before starting work").
N O T E
The electrical system is switched on and off and the diesel
engine started and stopped with the ignition key.
III
II
I
0
1 2
[0] Electrical system OFF, diesel
engine STOP
[I] Electrical system ON
[II]
without function
[III]
Engine start
N O T E
The pilot light for cold start assistance can also look different in
different machine types.
N O T E
When the engine is at a standstill and the electrical system
is switched on for a longer period (position I), the battery
discharges rapidly.
Switching on the electrical system
Turn the ignition key [1] to position I.
a
The electrical system is switched on.
a
Functional control of warning and indicator lights.
a
Indicator light for cold start assistance [2] lights up until the start
temperature is reached.
a
The diesel engine remains switched off.
Starting the diesel engine
NOTICE
Damage of the starter!
Damage or destruction of the starter as a result of an excessively long
start phase.
■
Keep the ignition key not lonager than 5 seconds in position III.
■
If a starting attempt fails, make a fault diagnosis.