Wacker Neuson RC50, Инструкция по эксплуатации

Страница: 122 / 222

Maintenance
General maintenance instructions
122 BA RC50_RC70 en 00
WARNING
Work above floor level!
Injury caused by falling.
■
Do not perform any maintenance or repair work above ground level
unless using a stable ladder or a maintenance scaffold.
■
To reach the maintenance points on the machine, use the steps
indicated. Do not step on any other machine element or add-on
part.
CAUTION
Electrical voltage!
Risk of injury due to electric shock.
■
Before starting maintenance work, set the battery isolating
switch to off in order to de-energize the electrical system. As
an alternative, disconnect the earthing/grounding strip from the
battery.
■
Wear personal protective equipment.
■
When working on the electrical system, be sure to only use
suitable and approved tools.
NOTICE
Short-circuits on electrical components!
Destruction or damage of machine parts by a short-circuit.
■
Before starting maintenance work, set the battery isolating
switch to off in order to de-energize the electrical system. As
an alternative, disconnect the earthing/grounding strip from the
battery.
■
Observe the operating instructions when using a jumper cable.
■
Do not lay any tool or machine element on the battery.
NOTICE
Engine hood swinging range!
Material damage when opening the engine hood.
■
Keep a sufficient distance to other objects located either above or
at the rear.
NOTICE
Uncontrolled movements!
Damage to machine or environment by uncontrolled steering system
movements and by consequent front or rear end swings.
■
Applying safety strut before:
■
crane loading the machine.
■
transporting the machine.
■
maintenance and repair work.