Wacker Neuson PV 35A, Руководство оператора

Страница: 23 / 30

Maintenance PV 35A
wc_tx000755gb.fm
23
4.5.2 Lubricating the core assembly:
4.5.2.1 A light coat of grease (i.e. Dubois TPG, Wacker Neuson
part number 0161045) should be applied to the entire
length of the core assembly. Apply grease to the core
assembly at least twice a year.
4.5.3 Disassembling the vibrator head assembly:
4.5.3.1 Place the vibrator head assembly in a vise equipped with a
set of “V” jaws.
4.5.3.2 Unscrew the hose connector
(k)
from the bearing case
(l)
using a 38mm wrench or a large pipe wrench.
Note: Threads on the casing assembly are left-hand and require
uniform heat to remove.
4.5.3.3 Remove the flex joint
(m)
from the drive joint
(u)
.
4.5.3.4 Unscrew the bearing case from the body
(n)
using a 41mm
wrench or a large pipe wrench.
4.5.3.5 Unscrew the nose
(o)
from the body using a 1-1/4" wrench
or a large pipe wrench.
Note: Threads on the casing assembly are left-hand and require
uniform heat to remove.
4.5.4 Disassembling the hose connector assembly:
4.5.4.1 Remove the top snap ring
(p)
using snap-ring pliers.
4.5.4.2 Remove the shaft joint
(d)
from the hose connector
(k)
.
4.5.4.3 Remove the bottom snap ring
(q)
.
4.5.4.4 Unscrew the drive joint
(r)
from the shaft joint using a 1/4"
square rachet (or metric equivalent). Hold the shaft joint
with a 12mm wrench or pliers.
Note: Threads are right-hand.