Wacker Neuson PV 35A Скачать руководство пользователя страница 20

PV 35A

Maintenance

wc_tx000755gb.fm

20

4.3

Air Cleaner

See Graphic: wc_gr004366

The engine is equipped with a foam element air cleaner. Service the

air cleaner frequently to prevent carburetor malfunction. 

NOTICE

: NEVER

 run engine without the air cleaner. Severe engine

damage will occur.    

NEVER

 use gasoline or other types of low flash point solvents for

cleaning the air cleaner. A fire or explosion could result.

To service the air cleaner (GX35 engine):

4.3.1

Press the latch tab 

(a)

 on top of the air cleaner cover 

(b) 

and remove

the air cleaner cover. Remove the foam element 

(c) 

and inspect it for

holes or tears. Replace the element if damaged.

4.3.2

Wash the element

 

in a solution of mild detergent and warm water.

Rinse thoroughly in clean water. Allow the element to dry thoroughly.

Soak the element in clean engine oil and squeeze out excess oil. The

engine will smoke when started if too much oil is left in the foam.

4.3.3

Using a moist rag, wipe dirt from the air cleaner body and cover. Be

careful to prevent dirt from entering the carburetor.

4.3.4

Re-install the filter element and air cleaner cover.

WARNING

b

c

wc_gr004366

a

a

Содержание PV 35A































Отзывы: