Wacker Neuson PSA2 500 Скачать руководство пользователя страница 3

PS2 500 / PSA2 500

Foreword

wc_tx001355gb.fm

3

Foreword

SAVE THESE INSTRUCTIONS—This manual contains important instructions for 
the machine models below. These instructions have been written expressly by 
Wacker Neuson Production Americas LLC and must be followed during installation, 
operation, and maintenance of the machines.

Machines discussed in this manual:

Machine 

documentation

From this point forward in this documentation, Wacker Neuson Production 
Americas LLC will be referred to as Wacker Neuson.

Keep a copy of the Operator’s Manual with the machine at all times. 

For spare parts information, please see your Wacker Neuson Dealer, or visit 
the Wacker Neuson website at http://www.wackerneuson.com/.

When ordering parts or requesting service information, be prepared to provide 
the machine model number, item number, revision number, and serial number.

Expectations 

for 

information in 

this manual

This manual provides information and procedures to safely operate and 
maintain the above Wacker Neuson model(s). For your own safety and to 
reduce the risk of injury, carefully read, understand, and observe all instructions 
described in this manual.

Wacker Neuson expressly reserves the right to make technical modifications, 
even without notice, which improve the performance or safety standards of its 
machines.

The information contained in this manual is based on machines manufactured 
up until the time of publication. Wacker Neuson reserves the right to change 
any portion of this information without notice.

The illustrations, parts, and procedures in this manual refer to Wacker Neuson 
factory-installed components. Your machine may vary depending on the 
requirements of your specific region.

Manufacturer’s 

approval

This manual contains references to 

approved

 parts, attachments, and 

modifications. The following definitions apply:

Approved parts or attachments

 are those either manufactured or provided by 

Wacker Neuson. 

Approved modifications

 are those performed by an authorized Wacker 

Neuson service center according to written instructions published by Wacker 
Neuson.

Unapproved parts, attachments, and modifications

 are those that do not 

meet the approved criteria.

Part No.

PS2 500
0008793, 0008794
0008795, 0008796
0009176, 0009177
0009178, 0620124

PSA 2 500
0008787, 0008790
0008791, 0008792
0009179, 0009180
0009181, 0620125

Содержание PSA2 500





























































Отзывы: