manualshive.com logo in svg

Wacker Neuson M 1000, Руководство оператора, Страница: 59 / 70

Поделиться
Скачать
Wacker Neuson M 1000 Скачать руководство пользователя страница 59

15 Accessories

100_0101_ac_0003.fm

59

15 Accessories

There is a wide range of accessories available for the machine.
For more information on the individual accessories, visit the following website: 

www.wackerneuson.com.

15.1

Special wrench for flexible shaft

The flexible shaft coupling can be removed easier with the special wrench.

15.2

Pipe thread seal

The pipe thread seal is needed for sealing the thread connection between the vi-
brator head and the flexible shaft, as well as between coupling and flexible shaft.

15.3

Special lubricant for flexible shafts 

The Wacker Neuson special lubricant is needed for lubricating flexible shaft 
cores in the flexible shafts.

15.4

SS-adapter

The SS-adapter is used to connect two S-flexible shafts.

Various lengths of flexible shafts is found in the 

Technical Data

 chapter.

NOTICE

Engine overload.
Flexible shafts which are too long can overload the engine.

X

Keep a total length of 9 m.

Содержание M 1000







































































Отзывы:

Нет отзывов