Wacker Neuson HDR155, Руководство оператора

Страница: 37 / 56

wc_tx003210gb.fm
37
HDR 155 Burner Setup
5.2 Setting Up the Burner
Factory
settings
5.3 Checking and Adjusting the Electrodes
Requirements
„
Machine shut down
„
Power disconnected
„
Burner cool
When to
inspect Inspect the electrodes on your machine every two weeks or after every 50 hours of
operation. The condition of the electrodes will drastically affect your machine’s
ability to fire efficiently.
Procedure Perform the procedure below to inspect or adjust the electrodes.
1. Remove the burner assembly. See topic Removing and Installing the Burner.
2. Inspect the condition of the electrode tips (a) . Replace any damaged or worn
electrodes.
3. Verify the electrode gap is set to the recommended measurement.
Refer to the table below to determine the condition of the electrode tips.
Machine Nozzle size Fuel pressure
Air damper
psi bar
HDR 155 0.85 (80ºW) gph
174 12
2
Condition Task
None; ok as is
None; ok as is
Replace
wc_gr010078