Wacker Neuson HDR115, Руководство оператора

Страница: 42 / 58

wc_tx004154gb_FM10.fm
42
Burner Setup HDR 115
6.4 Inspecting and Replacing the Burner Nozzle
When Replace the burner nozzle annually or if it is damaged.
Requirements
■
Machine shut down and cool to the touch
■
Machine properly positioned
Procedure Perform the procedure to replace the burner nozzle.
1. Remove the burner. See topic Removing and Installing the Burner Assembly .
2. Unscrew the nozzle (a) from the nozzle assembly.
3. Screw the new nozzle into the nozzle assembly.
4. Inspect the turbulator (b) for the following:
■
Wear. Replace if necessary.
■
Cleanliness. Clean if necessary using a wire brush.
■
Thermal stress. Replace if necessary.
5. Re-install the burner assembly. See topic Removing and Installing the Burner
Assembly.
Result The burner nozzle has been replaced.
CAUTION
Hot surface hazard. The machine surfaces may be hot.
►
Allow the machine to cool for a minimum of ten minutes before touching it.
a
b
wc_gr013180