Wacker Neuson DPS 1850, Руководство оператора

Страница: 18 / 34

7 Transport
100_0202_tr_0010.fm
18
7 Transport
7.1 Loading and transport
Previous conditions

To transport the vibratory plate, only use suitable lifting gear with a minimum load-bearing capacity
of 150 kg.

Always switch off the engine during transport!

Attach suitable tackle to the intended central lifting point.
Perform preparations
During loading and transport, the control handle must be locked in the vertical position or folded down.
WARNING
Improper handling can lead to injuries or serious material damage.

Read and observe all safety instructions in this operator's manual.
WARNING
Danger from falling.
A falling machine can cause serious injuries, for example from crushing.

Only suitable and tested lifting gear and tackle (safety load hooks) with a sufficient
load-bearing capacity can be used.

Only lift the machine at the central lifting point.

Reliably secure the machine to the lifting gear.

Do not lift the machine by the control handle and handle.

Leave the danger zone when lifting and do not stay under suspended loads.
WARNING
Risk of fire and explosion from fuel.
Escaping fuel may catch fire and cause serious burns.

Lift and transport the machine upright.
CAUTION
Since the central lifting point of the machine is fixed offset, the machine is not in the center
of gravity.
NOTE
Wacker Neuson recommends emptying the fuel tank prior to transport.