Wacker Neuson DF 16, Руководство оператора

Страница: 28 / 48

8 Use and operation DF 16
26 Operator's manual
8.3 Operating the machine
Tying
1. Place the machine with the tie outlet to the housing floor onto the crossover
point of the reinforcing steel rods at an exact right angle.
2. Press the reinforcing steel rods against each other:
„
When working in a vertical direction, step lightly onto the upper reinforcing
steel rod until both reinforcing steel rods are lying firmly together.
„
When working in horizontal direction press the two reinforcing steel rods
outside the tying area together with the empty hand.
3. Push the handle forwards slowly and evenly up to the stop, do not shove.
Note: When the stop is reached a distinct clicking sound is heard.
4. Pull the handle back slowly and evenly to the stop.
5. If necessary, bend any protruding tie ends.
NOTICE
Damage to the machine due to improper handling.
f
Always place tie outlet at right angles to the reinforcing steel rods.
f
Carry out push and pull movements evenly. Avoid jerky movements.
f
Always carry out push and pull movements up to the stop.
Item Designation
1 Tie outlet
2 Housing floor
3 Tie ends