Wacker Neuson DF 16, Руководство оператора

Страница: 12 / 48

3 Safety DF 16
10 Operator's manual
Structural modifications
Never attempt to modify the machine without the written permission of the man-
ufacturer. To do so will endanger your safety and the safety of other people! In
addition, this will void the warranty and the liability on behalf of the manufacturer.
Especially the following are cases of structural modifications:
„
Opening the machine and the permanent removal of components from
Wacker Neuson.
„
Installing new components which are not from Wacker Neuson and not equiv-
alent to the original parts in design and quality.
„
Installation of accessories which are not from Wacker Neuson.
It is no problem to install spare parts from Wacker Neuson.
It is no problem to install accessories that are available in the Wacker Neuson
product range of your machine. Please refer to the installation regulations in this
operator's manual.
Requirements for operation
The ability to operate the machine safely requires:
„
Proper transport, storage and setup.
„
Careful operation.
„
Careful service and maintenance.
Operation
Operate the machine only as intended and only when in proper working condi-
tion.
Maintenance
Regular maintenance is required in order for the machine to operate properly and
reliably over time. Failure to perform adequate maintenance reduces the safety
of the machine.
„
Strictly observe the prescribed maintenance intervals.
„
Do not use the machine if it requires maintenance or repairs.
Malfunctions
If a malfunction occurs, the machine must be secured immediately.
Eliminate the malfunctions that impair safety immediately!
Have damaged or defective components replaced immediately!
For further information, refer to chapter Troubleshooting .