Wacker Neuson CT 36, Руководство оператора

Страница: 56 / 70

SAFETY ALERT SYMBOL
This Safety Alert Symbol means
ATTENTION is required!
The Safety Alert Symbol identifies important safety
messages on machines, safety signs, in manuals
or elsewhere. When you see this symbol, be alert
to the possibility of personal injury or death. Follow
the instructions in the safety message.
Why is SAFETY important to YOU?
3 BIG REASONS
• Accidents KILL or DISABLE
• Accidents COST
• Accidents CAN BE AVOIDED
1
NOTICE OF COPYRIGHT PROTECTION
AEM Safety Manuals are protected as a copyrighted work with
ownership duly registered with the Copyright Office,
Washington, D.C. Any reproduction, translation, decompiling or
other use of an AEM Safety Manual, or portion thereof, or the
creation of derivative works based on an AEM Safety Manual,
without the prior written approval of AEM is expressly prohibited.
Copyright infringement can result in civil and criminal sanctions,
damages and other penalties being imposed.
Copyright © 2003 – Association of Equipment Manufacturers
!
Trowel.qxd 11/24/04 10:18 AM Page 1
U.S. Department of Labor publishes Safety and
Health Regulations and Standards under the
authority of the Occupational Safety and Health Act
for the General Construction and Mining Industries.
Its address is: U.S. Department of Labor,
Washington, DC 20210 (www.OSHA.gov and
www.MSHA.gov).
ANSI – American National Standards Institute, c/o
The American Society of Mechanical Engineers,
United Engineering Center, 345 East 47th Street,
New York, NY 10017 (www.ANSI.org).
ISO – International Standards Organization,
1, rue de Varembe Case postale 56, CH-1211
Geneva 20, Switzerland (www.ISO.ch).
SAE – Society of Automotive Engineers, Inc.,
400 Commonwealth Drive, Warrendale, PA 15096,
publishes a list, “Operator Precautions” SAE J153
MAY 87 (www.SAE.org).
AEM – Association of Equipment Manufacturers,
111 East Wisconsin Avenue, Milwaukee, WI 53202
(www.AEM.org).
WORD OF EXPLANATION
2
The following is a partial list of reference material on safe operating practices:
Trowel.qxd 11/24/04 10:18 AM Page 2