manualshive.com logo in svg

Wacker Neuson CT 36-400E, Руководство оператора

Поделиться
Скачать
Wacker Neuson CT 36-400E Скачать руководство пользователя страница 7

CT 36-400E

Safety Information

7

1.

Safety Information

This manual contains DANGER, WARNING, CAUTION, NOTICE and
NOTE callouts which must be followed to reduce the possibility of
personal injury, damage to the equipment, or improper service. 

This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.

CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.

NOTICE: Used without the safety alert symbol, NOTICE indicates a
situation which, if not avoided, could result in property damage.

Note:

  

Contains additional information important to a procedure.

DANGER OF ELECTROCUTION!

Danger of electrocution or severe electrical shock is present in the
trowel motor any time the motor is plugged in. Read all safety
information contained in this section before operating or servicing this
equipment. 

No one except a trained electrician should perform repairs to the
motor.

This equipment is built with user safety in mind; however, like any
electrical device it can present serious hazards if improperly operated
and serviced. Follow instructions carefully! Should questions arise
during operation or service of this equipment, contact Wacker Neuson
Corporation.

DANGER

WARNING

CAUTION

DANGER

Содержание CT 36-400E





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды