manualshive.com logo in svg

Wacker Neuson CT 36-400E, Руководство оператора

Поделиться
Скачать
Wacker Neuson CT 36-400E Скачать руководство пользователя страница 26

Maintenance

CT 36-400E

26

3.

Maintenance

3.1

Periodic Maintenance Schedule

Inspect all electrical cords before each use and have damaged cords
replaced or repaired at an authorized service center. 

  

Clean trowel after each use by flushing with water to remove concrete
splatters. DO NOT use a high pressure washer for the cleaning of
electrical equipment. The working tools must be thoroughly washed.

3.2

Trowel Lubrication

See Graphic: wc_gr001755

Grease trowel arms (b) with Shell Alvania RL2 grease or equivalent.
Oil the pitch control cable and other parts of trowel on an as needed
basis. 

Oil in the gearbox should not require replacement unless it was
drained to service gearbox. Check quantity through plug (a) located on
side of gearbox. Oil level should be to bottom of the plug threads. See
Technical Data for oil quantity and type.

Daily

before 

starting

After

first

20 hrs.

Every

50

hrs.

Every

100

 hrs.

Check external hardware.

„

Grease cam followers.

„

Check drive belt.

„

„

WACKER NEUSON

Содержание CT 36-400E





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды