Wacker Neuson BFS 1350AL, Руководство оператора

Страница: 32 / 58

Transport to the worksite
T01135GB.fm
32
2. Transport to the worksite
Requirements:
∗
When transporting the floor saw, use only suitable hoisting gear with a
minimum load-bearing capacity of 200 kg.
∗
Always turn off the motor during transportation!
∗
Empty the water tank!
∗
Remove the cutting blade prior to transport. Set the lowest cutting po-
sition on the floor saw.
∗
Attach appropriate secure lifting devices to the central lifting point (10)
provided for this purpose.
∗
If you transport the floor saw on the cargo area of a vehicle, strap it
down securely on the special safety bar.
∗
Fold the guide wheel to the top and the handles to the front (or the stir-
rup handle to the top).
∗
Apply the parking brake.
∗
Handles, guide wheel and other operating controls must not be used
as attachment points.
Note: Also observe the regulations in the chapter Safety information.