Wacker Neuson BFS 1350AL, Руководство оператора

Страница: 39 / 58

Operation
T01136GB.fm
39
4. Disconnect the water hose.
5. Fold up the cutting blade guard (1).
6. Loosen the tightening nut. Hold cutting shaft with spanner at span-
ner surfaces.
7. Fold down the cutting blade guard.
Note: To disassemble cutting disc from right side loosen nut in
clockwise direction (left-handed thread).
To disassemble cutting disc from left side loosen nut in anti-
clockwise direction.
3.8 Right-hand, left-hand cutting conversion
To switch the cutting blade from one side to the other proceed as fol-
lows:
1. Disassemble the water hose fasteners and then reassemble on the
opposite side in each case.
2. Loosen screws (24), remove cutting disc guard (1) and protective hood
(22).
3. Loosen screws (25) and then reassemble covering plates (26) on the
opposite sides.
4. Reassemble cutting disc guard (1) and protective hood (22) on the re-
quired sides.