background image

Foreword

ghi_tx001192gb.fm

3

Foreword

Machines 

covered by 

this manual

This manual covers machines with the following item numbers:

Machine 

documentation

„

Keep a copy of the Operator’s Manual with the machine at all times. 

„

Use the separate Parts Book supplied with the machine to order replacement 
parts. 

„

Refer to the separate Repair Manual for detailed instructions on servicing and 
repairing the machine.

„

If you are missing any of these documents, please contact Wacker Neuson 
Corporation to order a replacement or visit www.wackerneuson.com. 

„

When ordering parts or requesting service information, be prepared to provide 
the machine model number, item number, revision number, and serial number.

Expectations 

for 

information in 

this manual

„

This manual provides information and procedures to safely operate and 
maintain the above Wacker Neuson model(s). For your own safety and to 
reduce the risk of injury, carefully read, understand, and observe all instructions 
described in this manual. 

„

Wacker Neuson Corporation expressly reserves the right to make technical 
modifications, even without notice, which improve the performance or safety 
standards of its machines.

„

The information contained in this manual is based on machines manufactured 
up until the time of publication. Wacker Neuson Corporation reserves the right 
to change any portion of this information without notice.

Manufacturer’s 

approval

This manual contains references to 

approved

 parts, attachments, and modifica-

tions. The following definitions apply:

„

Approved parts or attachments

 are those either manufactured or provided by 

Wacker Neuson. 

„

Approved modifications

 are those performed by an authorized Wacker 

Neuson service center according to written instructions published by Wacker 
Neuson.

„

Unapproved parts, attachments, and modifications

 are those that do not 

meet the approved criteria.

Unapproved parts, attachments, or modifications may have the following conse-
quences:

„

Serious injury hazards to the operator and persons in the work area

„

Permanent damage to the machine which will not be covered under warranty

Contact your Wacker Neuson dealer immediately if you have questions about 
approved or unapproved parts, attachments, or modifications.

Machine

Item Number

AD 75LGR

0620696

Содержание AD 75LGR





























Отзывы: