Wacker Neuson 5000009054, Руководство оператора

Страница: 45 / 60

• Never allow children to play near, ride on or
operate the equipment
• Keep bystanders well clear of the operation
• Know the work area before you use the equipment.
Be aware of possible hazards
• Only use attachments and parts that are approved by
the manufacturer
• Follow all safe shutdown instructions (See page 23,
Shut Down Safely )
Know the Equipment
Read and understand the DANGER, WARNING,
CAUTION, and NOTICE safety labels and other
informational signs on the machine, the attachments,
and in the manufacturer’s operating manual(s). Ask your
supervisor or dealer to explain any information you do
not understand. Failure to obey safety instructions could
result in death or serious injury.
Know the following about your equipment:
• Function, purpose, and use of all controls
• Correct operation speeds
• How to quickly stop equipment in an emergency
• Rated operating capacity
Keep in mind that rain, snow, ice, loose gravel, soft
ground, slopes, and other site conditions can affect
your machine’s operating capabilities. Make sure you
are thoroughly familiar with your machine’s stability, and
other handling characteristics under any conditions you
are likely to encounter.
Pumps are used in a variety of applications, both indoor
and outdoor. Develop a safety program that complies
with requirements of your work site and follows the
manufacturer’s recommendations for safe equipment
operation.
IMPORTANT: This manual covers safe practices for
portable pumps. Do not pump volatile/flammable or
caustic/corrosive liquids. If your pump is engine driven,
do not operate in the presence of toxic, volatile or
explosive gases.
Refer to the owner’s manual or consult with the
manufacturer for proper pump materials if you are to
pump hazardous caustic/corrosive liquids.
Read and understand
manual(s) before
operating
Follow a Safety Program
9
Check and Use All
Available Safety Devices
To protect you and others around you, your machine
may be equipped with the safety equipment listed
below. Additional equipment may be required or some
items may not apply, depending on attachments used,
job site conditions, or applicable job site rules. Check
that each required item is securely in place and in
operating condition:
• Hard Hat
• Safety Shoes
• Eye Protection
• Respirators
• Heavy Gloves
• Reflector Vests
• Hearing Protection
• Face Protection
• Back Supports
• Fire Extinguisher
• First Aid Kit
• Guards
• Grab Handles
• Special enclosures or accessories required for
specific applications or job site conditions
• Safety Signs
• Beacons and/or alarms to indicate automatic starting
Use them! Never remove or disconnect any safety
device.
Check the Machine
Before beginning your work day, inspect the machine
and have all systems in good operational condition.
• Perform daily and periodic service procedures as
instructed by the equipment manufacturer
• Check for broken, missing, loose, or damaged parts.
Make necessary repairs
• Keep handholds clean and free of grease, oil, dirt,
snow or ice
• Ensure shielding is properly installed and in good
condition. Repair or replace if damaged or missing
• Ensure all tools or loose objects are removed or
securely fastened while operating the machine
Inspect
the machine before
each work day
Prepare for Safe Operation
10