Wacker Neuson 5000009054, Руководство оператора

Страница: 27 / 60

wc_tx000178gb.fm
27
PG 2A / 3A Maintenance
5 Maintenance
5.1 Maintaining the Emission Control System
Normal maintenance, replacement, or repair of emission control devices and
systems may be performed by any repair establishment or individual; however,
warranty repairs must be performed by a dealer/service center authorized by the
engine manufacturer. See the supplied engine owner’s manual for the applicable
emission warranty information.
5.2 Periodic Maintenance Schedule
The table below lists basic machine maintenance. Tasks designated with check
marks may be performed by the operator. Tasks designated with square bullet
points require special training and equipment.
Daily
before
starting
After
first
20 hrs.
Every
50
hrs.
Every
100
hrs.
Every
300
hrs.
Check fuel level.

Check engine oil level. 
Inspect air cleaner element.
Replace as needed.

Check external hardware.

Inspect hoses and housing for leaks. 
Clean air cleaner element.

Change engine oil.  
Clean cooling system.

Check and clean spark plug. 
Clean sediment cup.

Check and adjust valve clearance. 
Check and adjust impeller clearance.
