Wacker Neuson 38Z3, Руководство по обслуживанию

Страница: 24 / 83

SERV-HB 38Z3 EN – Edition 2.1 * 38z3s312.fm SERV-HB 38Z3 EN – Edition 2.1 * 38z3s312.fm
• •
Replace outside filter Replace outside filter as follows: as follows:
☞ ☞
Switch off the engine Switch off the engine
☞ ☞
Remove the key and carry it with you Remove the key and carry it with you
☞ ☞
Let the engine cool down Let the engine cool down
☞ ☞
Open the engine cover Open the engine cover
☞ ☞
Remove dirt and dust from the air filter and the area around the air filter Remove dirt and dust from the air filter and the area around the air filter
☞ ☞
Fold both bow clips Fold both bow clips
☞ ☞
Remove lower housing section Remove lower housing section
☞ ☞
Carefully remove outside filter Carefully remove outside filter
☞ ☞
valve, has been removed valve, has been removed
☞ ☞
Clean the parts with a clean lint-free cloth, do not use compressed air Clean the parts with a clean lint-free cloth, do not use compressed air
☞ ☞
Check the air filter cartridges for damage, only install intact filters Check the air filter cartridges for damage, only install intact filters
☞ ☞
Carefully insert new outside filter Carefully insert new outside filter in the upper housing section in the upper housing section
☞ ☞
Position lower housing section Position lower housing section (make sure it is properly seated) (make sure it is properly seated)
☞ ☞
Close both bow clips Close both bow clips
• •
Replace inside filter Replace inside filter as follows: as follows:
☞ ☞
Switch off the engine Switch off the engine
☞ ☞
Remove the key and carry it with you Remove the key and carry it with you
☞ ☞
Let the engine cool down Let the engine cool down
☞ ☞
Open the engine cover Open the engine cover
☞ ☞
Remove dirt and dust from the air filter and the area around the air filter Remove dirt and dust from the air filter and the area around the air filter
☞ ☞
Fold both bow clips Fold both bow clips
☞ ☞
Remove lower housing section Remove lower housing section
☞ ☞
Carefully remove outside filter Carefully remove outside filter
☞ ☞
Carefully remove inside filter Carefully remove inside filter
☞ ☞
Cover the air supply at the end of the filter with a clean lint-free cloth to prevent dust Cover the air supply at the end of the filter with a clean lint-free cloth to prevent dust
from entering the engine from entering the engine
☞ ☞
all contamination (dust) inside the upper housing section and dust valve all contamination (dust) inside the upper housing section and dust valve
has been removed has been removed
☞ ☞
Clean the parts with a clean lint-free cloth, do not use compressed air Clean the parts with a clean lint-free cloth, do not use compressed air
☞ ☞
Remove the cloth from the air supply Remove the cloth from the air supply
☞ ☞
Check the air filter cartridges for damage, only install intact filters Check the air filter cartridges for damage, only install intact filters
☞ ☞
Carefully insert the new inside filter Carefully insert the new inside filter
☞ ☞
Carefully insert outside filter Carefully insert outside filter
☞ ☞
Position lower housing section Position lower housing section (make sure it is properly seated) (make sure it is properly seated)
☞ ☞
Close both bow clips Close both bow clips
Make sure dust valve Make sure dust valve
Fig Fig . 20: . 20: Remo Remo ving t ving t he lowe he lowe r housi r housi ng sec ng sec tion tion
Fig Fig . 21: . 21: Remo Remo ving t ving t he fil he fil ter e ter e leme leme nt nt
Fig. Fig. 22: 22: Repl Repl aci aci ng the i ng the i nsid nsid e filt e filt er er
3-21 3-21
Maintenance Maintenance
Replacing the filter Replacing the filter
on lower housing section on lower housing section to the outside to the outside
with slightly turning movements with slightly turning movements
Make sure Make sure
all dirt (dust) inside the upper and lower housing sections, including the dust all dirt (dust) inside the upper and lower housing sections, including the dust
on lower housing section on lower housing section to the outside to the outside
with slightly turning movements with slightly turning movements
Make sure Make sure
in the upper housing section in the upper housing section
Important Important
G shows downwards once it is installed! G shows downwards once it is installed!