Wacker Neuson 38Z3, Руководство по обслуживанию

Страница: 20 / 83

SERV-HB 38Z3 EN – Edition 2.1 * 38z3s312.fm
Due to dirt and the formation condensation water in the fuel tank, empty the fuel tank every
500 service hours as follows:
☞
Place a container (e.g. a barrel) with sufficient capacity
☞
Suck off the diesel fuel
☞
Check the fuel tank for contamination and clean if necessary
☞
Replace the filter according to the maintenance specifications
☞
Refill the fuel tank
☞
Bleed the fuel system – see Bleeding the fuel system on page 3-10
Check the fuel prefilter as follows:
☞
If the red indicator ring rises to position
☞
Unscrew thread
➥
The water drains
➥
Wait until the indicator ring returns to the bottom of the water separator
☞
Screw thread
Interrupt fuel supply as follows:
☞
Turn ball-type cock
➥
Fuel supply is interrupted
☞
Turn ball-type cock
➥
Fuel supply is open again
Thread ose. Collect the water as it drains with a suitable container and
dispose of it in an environmentally friendly manner.
Fig. 3: Fuel prefilter
3-11
Maintenance
Emptying th e fuel tank
Fuel prefilter with water separator
A back on again
B to the
OF
F mark
B to the
ON
N mark
Environment
A is fitted with a h
On
Off
Old engine type (up to serial number AE02803):
New engine type (from serial number AG00573):