Wacker Neuson 38Z3, Руководство по обслуживанию

Страница: 12 / 83

SERV-HB 38Z3 EN – Edition 2.1 * 38z3s110.fm
Proceed as follows:
☞
Insert tube
➥
(jack function)
➥
The cab is raised as far as the pump will go
☞
Pull the handle until the cab is completely tilted beyond the centre of motion
➥
The cab is secured with safety cable
☞
Remove the split pin from bracket
➥
Slide tilt rod
➥
Secure tilt rod
Tilting the cab down:
☞
Remove the split pin from guide
➥
Slide tilt rod
➥
Insert the split pin into guide
☞
Use the handle to lower the cab until it is back on the pump
☞
Insert tube
☞
Slowly turn tube
➥
The cab is lowered by its own weight
➥
☞
Mount lock screws and (rear) with suitable tools and the specific torque
– see Tightening torques for high-resistance screw connections on page 2-9
Check tilt rod at regular intervals for cracks
and cuts.
☞
Replace defective parts immediately
Fig. 10: Tilting the cab
1-17
Operation
Tilting the cab
D onto guide pin E and pump as far as it will go
K into guide
K with the split pin in guide
K into clasp
D on pin
D counterclockwise (to the left)
The lift pump must be opened when driving with the machine (to prevent the
lift piston from to uching the cab)
A (front)
B
B
Caution
K, the split pin and safety cables H