Wacker Neuson 28Z3 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 200

background image

Edition 1.0 Supplementary Operator’s Manual for Protective Structures for Excavators

1-5

Supplementary Operator’s Manual for Protective Structures for Excavators

1.4

Differentiation of protective structures

Important

• Machine operation is only allowed with a correctly installed and intact cab

,

correctly installed and intact canopy or rollbar for the 803 (option).

• For additional protection, only use correctly installed and intact Wacker Neuson

protective structures that have been released for the machine.

Rollbar (valid for 803)

The rollbar has been specially designed for protection in case of an accident.

• ROPS/TOPS tested rollbar (option).
• Shatter protection (option from AI00967); protective structure against falling objects

(fragments or splinters) projected from front of machine.

Cab/canopy (valid for 1403/1404/1503/1703/ET18/1903/2003/ET20/2203/2404/
ET24/2503/28Z3/3003/3503/3703/38Z3/50Z3)

The cab/canopy have been specially designed for protection in case of an accident.

• ROPS/TOPS tested canopy (open version).
• ROPS/TOPS tested cab (closed version/option).
• Protective FOPS structure (option) for cab/canopy; protective structure against falling

objects.

• Front Guard (option) for cab/canopy; protective structure against objects from the

front (for instance pipes, tree trunks etc.).

• Shatter protection (option) for canopy; protective structure against falling objects

(fragments or splinters) projected from front of machine.

Important

Unless otherwise specified, the term “Cab” refers both to the open and closed
variants.

Cab (valid for 5002/6002/6003/6502/6503/75Z3/8002/8003/9503/12002/14504)

The cab has been specially designed for protection in case of an accident:

• ROPS/TOPS tested cab.
• Protective FOPS structure (option) for cab; protective structure against falling objects.
• Front Guard (option) for cab; protective structure against objects from the front (for

instance pipes, tree trunks etc.).

Not all protective structures are available for all machines, and not all protective structures
can be combined with each other. If you are not sure, contact a Wacker Neuson service
center.

«
...
7
8
9
10
11
...
»

Содержание 28Z3









































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 28Z3

Бренд: Daewoo Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды