Wacker Neuson 28Z3, Руководство оператора

Страница: 55 / 200

OM 28Z3 US – Edition 2.0 * 28Z3b210.fm
2-3
Safety Information
• The user/owner commits himself to operate and keep the machine in serviceable
condition and, if necessary or required by law, to require the operating or servicing
persons to wear protective clothing and safety equipment
User training and knowledge • Always keep this Operator’s Manual and other manuals that accompany the machine in
their storage compartment provided in the operator station on the machine.
Immediately replace an incomplete or illegible Operator’s Manual.
• All persons working on or with the machine must read and understand the safety
information in this Manual before beginning work. This applies especially to persons
working only occasionally on the machine, such as performing set-up or maintenance
tasks.
• Follow, and instruct the operator in, legal and other mandatory regulations relevant to
accident prevention and environmental protection.These may include handling
hazardous substances, issuing and/or wearing personal protective equipment, or
obeying traffic regulations.
• The user/owner must regularly ensure that all persons entrusted with operation or
maintenance of the machine are working in compliance with this Operator's Manual and
are aware of the risks and safety factors of the machine.
Preparing for use
• Before starting up the machine, ALWAYS inspect the machine to make sure that it is
ready for safe work and travel operation.
• Wear close-fitting work clothes that do not hinder movement. Tie back long hair and
remove all jewelry (including rings).
Modifications and spare parts • NEVER make any modifications, additions or conversions to the machine and its
superstructures (for example, cab, etc.), or the machine’s attachments, without the
approval of Wacker Neuson! Such modifications may affect safety and/or machine
performance. This also applies to the installation and adjustment of safety devices and
valves, as well as to welding work on load-bearing elements.
• Spare parts must comply with the technical requirements specified by Wacker Neuson.
Contact your Wacker Neuson dealer for assistance.
• The user/owner commits himself to operate and keep the machine in perfect condition,
and, if necessary or required by law, to require the operating or servicing persons to
wear protective clothing etc.
• In the event of safety-relevant modifications or changes on the machine or of its
behavior, stop the machine immediately and report the malfunction to the competent
authority/person.
• Safety-relevant damage or malfunctions of the machine must be rectified immediately.
Applications with lifting gear
Lifting gear applications are procedures involving raising, transporting and lowering loads
with the help of slings and load-securing devices (e.g. ropes, chains).
No applications with lifting gear under any circumstances!
Machines with a maximum authorized lifting capacity of over 1000 kg (2205 lbs.) or an
overturning moment of over 40,000 Nm (29,500 ft. lbs.) may be used for lifting gear appli-
cations if the following conditions are fulfilled: