Wacker Neuson 28Z3 Скачать руководство пользователя страница 177

Страница: 177 / 200

OM 28Z3 US – Edition 2.0 * 28Z3b530.fm

5-32

Maintenance

Threaded connections and fasteners

All threaded connectors and fasteners must be checked regularly for tightness, even if
they are not listed in the maintenance schedules.

☞

Engine fastening screws.

☞

Fastening screws on the hydraulic system.

☞

Line, bucket teeth and pin fastenings on the attachment.

Retighten loose connections immediately. Contact an authorized Wacker Neuson service
center if necessary.

Pivots and hinges

All mechanical pivot points on the machine (e.g. door hinges, joints) and fittings (e.g. door
arresters) must be lubricated regularly, even if they are not listed in the lubrication plan.

Содержание 28Z3









































































































































































































Результаты поиска

Содержание 28Z3

Отзывы:

Похожие инструкции для 28Z3

Бренды по названию

Популярные бренды

Wacker Neuson 28Z3, Руководство оператора

Результаты поиска

Содержание 28Z3

Отзывы:

Похожие инструкции для 28Z3

Бренды по названию

Популярные бренды