Wacker Neuson 1101C, Руководство оператора

Страница: 135 / 180

BA 901/1101 en – Edition 2.1 * 91101b520.fm
5-11
Maintenance
Replacing the filter
• Replace outside filter A as follows:
☞
Stop the engine
☞
Remove the key
☞
Let the engine cool down
☞
Open the engine cover
☞
Remove dirt and dust from the air filter and the area around the air filter
☞
Fold bow clips E on lower housing section F to the outside
☞
Remove lower housing section E
☞
Carefully remove outside filter F with slightly turning movements
☞
Ensure that all dirt (dust) inside the upper and lower housing sections, including the
dust valve, has been removed
☞
Clean the parts with a clean lint-free cloth, do not use compressed air
☞
Check the air filter cartridges for damage, only install intact filters
☞
Carefully insert new outside filter B in the upper housing section
☞
Position lower housing section F (ensure that it is properly seated)
☞
Close bow clips E
• Replace inside filter C as follows:
☞
Stop the engine
☞
Remove the key and carry it with you
☞
Let the engine cool down
☞
Open the engine cover
☞
Remove dirt and dust from the air filter and the area around the air filter
☞
Fold bow clips E on lower housing section F to the outside
☞
Remove lower housing section F
☞
Carefully remove outside filter B with slightly turning movements
☞
Carefully remove inside filter C
☞
Cover the air supply at the end of the filter with a clean lint-free cloth to prevent dust
from entering the engine
☞
Ensure that all dirt (dust) inside the upper and lower housing sections F , including dust
valve D , has been removed
☞
Clean the parts with a clean lint-free cloth, do not use compressed air
☞
Remove the cloth from the air supply
☞
Check the air filter cartridges for damage, only install intact filters
☞
Carefully insert the new inside filter C
☞
Carefully insert outside filter B in the upper housing section
☞
Position lower housing section F (ensure that it is properly seated)
☞
Close bow clips E
Notice!
Ensure that dust valve D shows downward once it is installed!
Fig. 94: Removing the lower housing section
Fig. 95: Removing the filter element
E
F
B
D
Fig. 96: Replacing the inside filter
C