Wachs 06-030-MAN, Руководство пользователя

Страница: 36 / 56

Window Cutter
32 Part No. 06-030-MAN, Rev. 2-0709 E.H. Wachs
2.
Turn the head to the desired cutting direction.
IMPORTANT: Make sure the blade is oriented cor-
rectly for the direction you are cutting, as illustrated in
Figure 5-21.
Figure 5-21. Make sure the blade is oriented to cut in
the cutting direction indicated.
Feeding the Cutter into the Pipe
Before engaging either the axial or radial motion drive for
cutting, first feed the cutter blade into the pipe.
1.
Make sure the spindle drive lever is in the OFF posi-
tion, and the motion drive lever is in the NEUTRAL
(center) position.
2.
Turn on the hydraulic power unit and turn on power to
the window cutter with the HPU control pendant.
3.
Use the drive select lever at the end of the machine
and the motion drive lever on the manifold to position
the blade where you want to start cutting.
4.
If necessary, rotate the cutter head to the correct orien-
tation as described in the previous section.
5.
Set the drive select lever for the drive motion (axial or
radial) that you will be cutting.