WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
3
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
INSTALLING THE SURFACE MOUNT ACCESSORY
Softscape Installation
:
1.
Attach the three removable spikes to the surface mount
accessory by screwing them in.
2.
Using a piece of wood to buffer the impact, hammer the
assembled mount into the soil till the bottom of the surface
mount accessory is flush with the ground.
3.
Lead your wire through the wire slot and screw in your fixture.
4.
Connect fixture wires to power supply wires as normal using
the outdoor rated direct burial wire nuts provided.
Hardscape Installation
:
1.
Mount the accessory to the surface using No. 10 Philips head
screws that are at least half an inch long.
2.
If mounting on concrete or something similar, first use
plastic anchors sized for No. 10 screws.
3.
Create a route underneath the accessory for your wire to
travel through.
4.
Lead your wire through the created route and screw your
fixture onto the surface mount accessory.
Installing Fixture Caps
:
Thread the fixture cap into the stem body by rotating it clockwise.
Fixture
Surface Mount
Accessory
Wire Slot
Removable Spike
No.10 Mounting Screw
Surface Mount
6011
Threaded Stem
Cap
Threaded Stud
Cap
6041
Threaded Stud
Cap
6051
INSTALLATION INSTRUCTION
PATH LIGHT
6011 / 6021 / 6031 / 6041 / 6051 / 6061 / 6071 / 6081 / 6091 / 6321 / 6311
