MIO-H29RRXS004270 Rev D
G&B Specialties Inc. 535 West 3
rd
Street, Berwick, PA, USA Tel: (570) 752-5901 Fax: (570) 752-6397
US Field Service: 570-441-6988; CAN Field Service 570-854-0482; www.rafna.com
-6-
R
EAR
M
OUNTING OF
H
YDRAULIC
P
UMP
1.
Position the pump mounting bracket against the right side rear mounting bracket as shown.
Clamp it in place. Position the pump and spacer on top of the pump mounting bracket as
shown with the tank towards the right side of the vehicle. Ensure the pump and spacer will
not interfere with any part of the vehicle or railgear components. The hand pump handle
receiver can be turned to point downwards to ease hand pump handle use.
2.
Once the pump mounting bracket position is verified, remove the pump and spacer and weld
the pump mounting bracket to the right side rear mounting bracket all around.
3.
Reposition and fasten the pump on top of the rear pump mounting bracket with four 5/16”
x 1” long bolts, four 5/16” lock washers and four 5/16” washers.
