WABECO CC-F1200 high speed, Руководство по эксплуатации

Страница: 146 / 156

146
20. Safety cabin (optional)
20.1 Setting up the safety cabin
When mounting the safety cabin to a WABECO tool cabinet, the appropriate bored holes are already
present. The tool cabinet ensures a safe base for the milling machine or safety cabin.
If the safety cabinet is secured to another suitable surface, the 4 through holes must be bored into the
surface by the client. For the positions of the 4 fixture threaded sockets (thread M8) of the safety
cabinet, see diagram. The diameter of the through holes in the surface must be at least 9 mm.
20.2 Mounting of the safety cabin to the tool cabinet
(optional)
■
The safety cabinet (2) is positioned, as shown, on the tool cabinet (1).
■
The screws and washers required for assembly are included in the scope of delivery.
To screw the safety cabinet to the tool cabinet
proceed as follows:
1. Combine each screw with a washer
2. Open the door or the tool cabinet
3. Push the screws from below, through the bored holes in the tool cabinet, into the fixture threaded
sockets and tighten using a Allen key of size 6.