SmartBoard Display / Controller (EN)
11
Safety
1
2
3
4
5
6
7
8
Safety instructions / warnings
Carefully read all of the safety
instructions before starting any
device diagnostics, replacement
or commissioning!
Always follow these safety instructions
to prevent personal injury or material
damage.
Read and follow the safety
instructions in the operating
manual of the vehicle
manufacturer!
The SmartBoard housing must
not be opened, with the
exception of a speciality
workshop changing the battery.
Painting the SmartBoard device
is prohibited.
The following precautions must be taken
before work is performed on the vehicle
(repair, replacement of a device,
diagnostics etc.)
:
– Only trained and qualified
professionals are permitted to work
on the vehicle.
– The company's accident prevention
regulations and the national
requirements must be complied with.
– Suitable protective clothing must be
worn as required.
– The workplace must be dry and
adequately lit and ventilated.
WARNING
Of unsecured vehicle rolling
away!
Risk of injury (crushing, impact,
being run over, etc.) due to
brake activation when work is
being performed on the vehicle
(e.g. pressure-sensor
calibration).
Check that the transmission is in
"neutral" and that the tractor parking
brake is actuated.
Place chocks under the tyres to
secure the vehicle from rolling away.
Post a visible sign on the steering
wheel indicating that work is being
performed on the vehicle and that the
brake must not be activated.
