W6 N 5000 Exklusive, Руководство пользователя

Страница: 114 / 169

Automatic bar tack
Using a pattern
Select the following settings:
Designation
Needle
position Prog.
No. Pattern Application Presser
foot Needle size
Buttonholes
42
Bar tack
for reinforcing heavily
stressed areas, such
as trouser pockets. W6
90 Super
Stretch
needles
(HAx1SP)
Thread tension setting Automatic
1. Adjust the slider to the length of the bar tack.
a = length of the bar tack
2. Thread the upper thread through the opening in the buttonhole foot and
leave the upper thread on the left-hand side.
3. Place the fabric under the presser foot so the starting point is on this side.
Lower the foot.
If you are sewing a bar tack to the end of thick fabrics, such as a trouser
pocket, place fabric of the same thickness or a piece of cardboard next to the
fabric.
114