W6 N 5000 Exklusive, Руководство пользователя

Страница: 113 / 169

Sewing buttonholes
Using a pattern
9. Carefully cut an opening in the middle of the buttonhole without cutting the
stitches on either side. Use a needle as a stop. For utility stitches no. 35–37
a hole is punched using punching pliers and the opening is made with a
seam ripper. Place cardboard under the fabric to open the eye.
PLEASE NOTE Accident prevention.
Do not place your fingers in the way of the ripper when using the seam ripper.
11.2.12 Automatic bar tack – program 42
113
Please note: Every time before threading
•
Set the presser foot lever to the upper position.
•
Press the Needle Up / Needle Down button (the thread take-up lever and
needle threader automatically move into the correct position).
•
Thread the upper thread taut in all positions.
•
Thread the lower thread taut and slowly into the silver metal slot in the
7 o’clock and 9 o’clock positions on the black hook race until it clicks into
place.
•
In the event of any lack of clarity: watch the Optimal Threading video that is
just 4 minutes long on the W6 website under Service / Help / W6 N 5000
Exklusive.
•
95% of all errors occur during threading. Failure to do this will always lead to