1 X 4 ANTENNA SWITCH
19
19
18
(18
(19)
)
This 5 Pin DIN switches the coax input of the 1 X 4
Switch to one of the 4 coax outputs. The 1 X 4
Antenna Switch Control Connector may be connected to
the 3 X 1 Controller / Switch 1 X4 Select 5 pin DIN
output. (See page 7). Below is a picture that defines the
function of the pins on the 5 PIN DIN.
These LEDs are wired to indicate which coax output is
connected to the coax input.
CONTROL CONNECTOR
OUTPUT COAX LEDS
Din connectors shown
on side to be soldered
- Select Coax Output 1
- Select Coax Output 2
- Select Coax Output 3
+12 Volts DC
- Select AUX Coax Output
-13-
