1 X 4 ANTENNA SWITCH
15
16
17
(15
(16)
(17)
)
Station ground should be connected to this connector.
Grounding this point grounds any of the four coax
connectors that are not connected to the Input coax
connector.
This Input Coax RF Connector may be connected
to one of 4 Output Coax RF Connectors. Connection
of the Input to the output is done using the control 5 Pin
DIN connection (see page 13). This unit is capable of
handling up to 1500 watts PEP of RF.
These 4 coax RF connectors are used to connect
antennas or other external devices to the Input Coax
RF Connector. Switching the input connector to one
of 4 Output connectors is done using the control
5 Pin DIN connection (see page 13). This unit is capable
of handling up to 1500 watts PEP of RF.
GROUND CONNECTOR
INPUT COAX RF CONNECTOR
OUTPUT COAX CONNECTORS
-12-