www.prolight.co.uk
Gig Rig CompACT 10
User Manual
9
Balanced XLR Connection
Connection With The Mains
Connect the unit to the mains via the IEC mains
inlet using the 13A UK - IEC cord supplied.
The protective earth must be connected,
do not attempt to remove or tamper with
the mains earth connection.
Switch the unit on. After switching on the speaker
system, wait 8-10 seconds before you turn the volume
control up in order to avoid speaker damage.
CAUTION!
Increase the level of each channel up to the point where the clip LEDs illuminate.
Always check the sound pressure level with a meter in order to keep to the legal threshold.
Jack plug
Connections
This speaker system is equipped with 4 pole, locking speaker sockets. For locking the connection turn
the plug to the right. For unlocking pull the unlock button and turn the plug to the left and pull it out of
the socket.
Speaker socket
Installing the speaker cables
Connect the satellite speakers to the left and right satellite sockets. The signal will be transmitted
to the individual speakers.
Always treat the cables carefully and protect them from damage during transportation.
Always install the cables in a structured way and protect them from damage.
The cables must be installed in a way that no person can trip over them. Always fix the cables
with an appropriate tape etc.
Operating instructions
