www.prolight.co.uk
Gig Rig CompACT 10
User Manual
12
Installation instructions & WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed
with other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for disposal.
IMPORTANT! OVER HEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE
including (but not limited to)
calculating working limits, installation materials used, and periodic safety inspection of all installation
materials and the speaker system. If you lack these qualifications, do not attempt the installation
yourself, but instead use a professional structural rigger. Improper installation can result in bodily
injury and damage to your property.
The speaker system has to be installed out of the reach of people.
CAUTION:
Speaker systems in overhead installations may cause severe injuries when falling!
If you have doubts concerning the safety of a possible installation, do not install the speaker system!
Before rigging make sure that the installation area can hold a minimum point load of 10 times the
speaker systems weight.
Replacing The Fuse
CAUTION!
Before replacing the fuse, please make sure that mains cable is unplugged.
Procedure
Step 1: Unscrew the fuse holder and the rear panel with a screw driver (anti-clockwise).
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install a new fuse of the same type and rating.
Step 4: Replace the fuse holder in the housing and fix it.
