5.2.4 Scattering Effect
Scattering light effect is a noise factor to ToF products, it is caused by multiple reflection
inside the lens of camera or the cover of camera.
To eliminate the scattering light effect, you should:
1. Keep the cover glass of the camera clean;
2. Do NOT place any other cover glass in front of the camera;
3. Keep the camera working environment as clean as possible;
6 Installation
6.1
Hardware Installation
You have read and understood the warnings listed under "Precautions" on Chapter 2;
To achieve reliable distance measurements, please follow below tips:
Better not using the camera in strong sunlight. If have to, keep the ambient light
below 50k Lux.
Do NOT place any objects in the scene that are not part of your intended
target, especially mirrors or other shiny surfaces/objects.
Maintain a stable housing temperature during operation.
Take measures to provide cooling to camera
Mount the camera robustly.
All accessories are ready
The installation steps are as below:
1 Connect the camera module to PC USB interface through USB cable, as Figure
Figure 4.1 Hardware Installation
2 In Windows, when the camera module is successfully connected, it will pop up the
notice of the device driver installation. After the driver is auto-installed successfully,
it will display the Vzense RGBD Camera device in Windows Device Manger.
