background image

31

PRESSURE WASHER 3000P

!

WARNING

Allow muffler, engine cylinder and fins to cool  

before touching. 
Remove accumulated debris from muffler area 

and cylinder area. 
Install and maintain in working order a spark 

arrester before using equipment on forest-

covered, grass-covered, brush-covered 

unimproved land. 

How to start the engine

!

WARNING

Petrol and its vapors are extremely flammable 

and explosive. 
Fire or explosion can cause severe burns or 

death.

When Starting Engine 

• Ensure that spark plug, muffler, fuel cap and air cleaner are in place and secured.
• Do not crank engine with spark plug removed. 
• If engine floods, set choke to open/run position, move throttle (if equipped) to fast  

  position and crank until engine starts.

!

WARNING

Engines give off carbon monoxide, an 

odourless colourless, poison gas. Breathing 

carbon monoxide can cause nausea, fainting or 

death.

• Start and run engine outdoors. 
• Do not start or run engine in enclosed area, even if doors or windows are open.

!

WARNING

Unintentional sparking can result in fire or 

electric shock. 
Unintentional start-up can result in 

entanglement, traumatic amputation, or 

laceration. 
Fire hazard

Содержание VF3000P













































Отзывы: