H08.0.1X.6C-18_VWR
General
Read through this document attentively and make yourself familiar to the of the
device before you use it. Keep this document in a ready-to-hand way in order to be
able to look up in the case of doubt
Intended use:
The TD 110 measures the temperature in liquids, air/gas and soft media.
The measurement is performed with a Pt1000 probe, permanently connected to the
measuring instrument.
• High accuracy and precision are the strengths of the TD 110.
• The device can be used as a reference measuring
instrument for the calibration
of other measuring
systems.
Safety Instructions
This device has been designed and tested in accordance to the safety regulations
for electronic devices. However, its trouble-free operation and reliability cannot be
guaranteed unless the standard safety measures and special safety advises given
in this manual will be adhered to when using it.
1. Trouble-free operation and reliability of the device can only be guaranteed if it
is not subjected to any other climatic conditions than those stated under
“Specification”.
Transporting the device from a cold to a warm environment condensation may
result in a failure of the function. In such a case make sure the device temper a-
ture has adjusted to the ambient temperature before trying a new start -up.
2. Whenever there may be a risk whatsoever involved in running it, the devic e
has to be
switched off immediately and to be marked accordingly to avoid re -starting.
Operator safety may be a risk if:
there is visible damage to the device
the device is not working as specified
the device has been stored under unsuitable conditions fo r a longer time
In case of doubt, please return device to manufacturer for repair or maint e-
nance.
3.
Warning:
Do not use these product as safety or emergency stop device, or in
any other application where failure of the product could result in personal injury
or material damage.
Failure to comply with these instructions could result in death or serious injury
and material damage.
4.
Do not heat the probe over 200 C
