Add DNA samples to the gel
Use an appropriate pipette to
carefully dispense samples into the
wells of the gel
.
Note: Gel loading buffer should be
mixed with the DNA samples so they
will sink to the bottom of the wells.
Carefully lower the safety cover onto the
gel tank. The orange viewing filter should
fully contact the surface of the buffer so
there are no bubbles visible. If the buffer
level is too low to contact the orange
filter, remove the cover, and add more
buffer to the tank.
Slide the blue LED illuminator under
the gel tank.
11
vwr.com | Instruction manual VWR® Real Time Electrophoresis Tank
