Pour the agaose gel/DNA stain
solution into the gel tray to make a
gel approximately 4mm thick.
Each 6x10.5cm tray requires
about 25ml of agarose.
Note: VWR’s EZ Vision Products
are recommended for gel stain.
After the gel has solidified
(approximately 20 minutes) hold the
two sides of comb and gently lift it out
of the gel. The wells should be
straight and undamaged.
Carefully remove the gel tray with the
gel from the stand and place it into
the migration tank in the correct
orientation. (DNA samples will
migrate from the
– to + electrode).
Note: After mixing and heating
agarose solution, let it cool to
approximately 60
°
C before
pouring into the gel trays
9
vwr.com | Instruction manual VWR® Real Time Electrophoresis Tank
