background image

Gel Imagers 

 

length of the Gel Imager.   

 

 

Processor 

 

ƒ

 

Internal Storage: 75GB or more 

ƒ

 

USB 2.0 ports: 1 front, 4 in the back 

ƒ

 

USB storage device capacity: 1GB (minimum) 

ƒ

 

Software: Gel Imager software  

 

Ethidium Bromide Filter (EtBr) 

The Ethidium Bromide (EtBr) Filter (50mm sq.) UV blocking 
band pass interference filter blocks UV and IR radiation 
emitted from the transilluminator. The filter is placed in the 
filter tray below the camera assembly. The filter allows 
visualization of fluorophores from 580-630nm, targeting the 
EtBr emission which peaks at 605nm. The EtBr filter can be 
substituted for other specific fluorophore filters or removed 
when imaging non-fluorescent media (protein gels, colony 
plates, etc.) in order to produce brighter images. 

 

 

Darkroom

   

The darkroom features: 

ƒ

 

Gel viewer window 

ƒ

 

Overhead white light 

ƒ

 

Wide access doors with UV safety switch 

 

Transilluminator

 

A transilluminator is included with the Gel Imager.  VWR offers a large variety of transilluminators, from 
models with 8-watt, single wavelength and single intensity to models with multiple wavelengths and high/low 
intensities.    

 

Note:  

For UV protection, there is a 10-minute timer installed in the Gel Imager. The timer shuts off the 

transilluminator after 10 minutes of operation. A switch on the front of the darkroom allows the user to reset 
the timer. Opening the darkroom door automatically resets the timer. 

 

LCD Touch

 

Screen

 

The display is an 8-inch VGA color touch screen connected to the darkroom cabinet with tilt adjustment. The 
touch screen allows the user to preview, snap, save and print images, as well as select certain preference 
options, without the need of an external mouse or keyboard. 

A stylus pen is included for increased pointer control for selecting software options on the touch screen. 

 

Focus Target 

The focus target fluoresces when placed on a transilluminator or when exposed to overhead UV. The target 
provides sharp, fluorescent images to aid in adjusting the focus of the camera. 
 

Removable USB Stick 

The removable USB stick has 1 GB memory (minimum) included with the system which connects to the 
system allowing transfer of images.   

 

 

Содержание 89131-380













Отзывы: