background image

Gel Imagers 

 

12 

There is a 10-minute timer that turns off the transilluminator automatically after 10-minutes of use. The timer 
switch located at the front of the darkroom can be reset (which restarts the 10-minute count).  

 

Error Messages Pop Up on the Screen 
 

Messages appear on the screen that might be related to the Gel Imager software interface, or Microsoft 
Windows. If the message is related to Microsoft Windows, such as a reminder to activate or update your 
copy of Windows, please contact your system administrator for assistance. 

If an error message appears repetitively, and your system administrator does not recognize it as a Microsoft 
Windows error, contact UVP Technical Support for further assistance. 

 
Technical Support 

 

 . 

 

Warranty 

 

UVP's quality instruments are guaranteed to be free of defects in materials, workmanship, and manufacture 
for one (1) year from date of purchase. Transilluminators are similarly warranted for two (2) years from the 
date of purchase.  Consumable and disposable products, including, but not limited to lamps or light tubes, 
filters, or rechargeable batteries are guaranteed to be free from defects in manufacture and materials for 
ninety (90) days from date of purchase. If equipment failure or malfunction occurs during the warranty 
period, UVP shall examine the inoperative equipment and have the option of repairing or replacing any 
part(s) which, in the sole and absolute discretion of UVP, were originally defective or became so under 
conditions of normal usage and service. No warranty shall apply to any instrument, or part thereof, that has 
been subject to accident, negligence, alteration, abuse or misuse by the end user. Moreover, UVP makes no 
warranties whatsoever with respect to parts not supplied by UVP or that have been installed, used and/or 
serviced other than in strict compliance with the instructions appearing in this installation and instruction 
manual. In no event shall UVP be responsible to the end-user for any incidental or consequential damages, 
whether foreseeable or not, including but not limited to property damage, inability to use equipment, loss of 
business, loss of profits, or inconvenience arising out of or connected with the use of instruments produced 
by UVP. Nor is UVP liable or responsible for any personal injuries occurring as a result of the use, misuse, 
installation and/or servicing of equipment. Representations and warranties made by any person, including 
dealers and representatives of UVP which are inconsistent or in conflict with the terms of this warranty 
(including but not limited to the limitations of the liability of UVP as set forth above), shall not be binding 
upon UVP unless reduced to writing and approved by an expressly authorized representative of UVP.  THIS 
WARRANTY IS EXPRESSED IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, 
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON UVP’S PART AND UVP NEITHER 
ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR UVP ANY OTHER LIABILITIES IN 
CONNECTION WITH THE SALE OF THE SAID PRODUCTS.   

 

Содержание 89131-380













Отзывы: