VWR International 1917 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 24

VWR International 1917 Скачать руководство пользователя страница 3

3

RECEIVING AND INSPECTION

IMPORTANT: READ THIS INSTRUCTION MANUAL IMMEDIATELY.

Your satisfaction and safety require a complete understanding of this unit, including
its proper function and operational characteristics. Be sure operators are given
adequate training before attempting to put the unit in service. NOTE: This
equipment must be used for its intended application; any alterations or
modifications will void your warranty.

1.1

Inspection:

The carrier, when accepting shipment, also accepts responsibility for

safe delivery and is liable for loss or damage claims. On delivery, inspect for
visible exterior damage, note and describe on the freight bill any damage found
and enter your claim on the form supplied by the carrier.

1.2

Inspect for concealed loss or damage on the unit itself, both interior and exterior. If
any the carrier will arrange for official inspection to substantiate your claim. Save
the shipping crate until you are sure the unit has been delivered in good condition.

1.3

Return Shipment:

If for any reason you must return the unit, contact your

customer service representative for return authorization and supply data plate
information. Please see the manual cover for information on where to reach
customer service.

1.4

Make sure that all of the equipment indicated on the packing slip is included with
the unit. Carefully check all packaging before discarding. This unit is equipped
with 6 shelves, 24 shelf clips, CO

2

tubing kit and 4 adjustable feet.

Section

1

«
1
2
3
4
5
...
»

Содержание 1917

























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды