VuQube VQ4000, Руководство по эксплуатации

Страница: 17 / 28

Page 15
9. When test is complete, a screen similar to one of the following should appear:
If indicated results are not obtained, go back to Step 5 and run test again. Contact King
Controls if the check switch fails to load after 4 attempts.
10. Save the settings, exit to the main menu screen and wait for your programming to
download.
11. DISH 1000/1000a ONLY: Verify your saved settings show your desired satellite trio
(110, 119, 129 or 110, 119, 61).
You can now use the automatic satellite switching feature of your VuQube.
MUST SHOW
“SW21”
NO “X”s
MUST SHOW
“SW64”
NO “X”s
DISH 500
DISH 1000a DISH 1000
BELL EXPRESSVU
Dish Network HDTV: Dish Network 1000 and 1000a: Changing the Satellite Trio
IMPORTANT! Perform the procedure below only if you are unable to receive all of your HD programming
in a particular area of the country.
If you are unable to receive all of your HD programming, you may have traveled outside the coverage area of
your chosen trio. Reconfigure your receiver starting on page 13, using the other satellite trio.