Operator`s Manual
–
Electric Winch
16
2018-08-03, rev 1
Inspection
Daily Inspection
The operator must conduct a daily inspection on the equipment at the beginning
of each shift or when the winch is used for the first time during the shift. The
daily inspection is a visual and auditory examination of the machine. The
following procedures should be carried out with no load:
Daily Inspection
1
Make sure the equipment is not tagged out of service
2
Make sure all functions work properly (up/down, emergency stop, horn,
etc.) and they agree with the indications on the control pendant
3
Check if the braking distance is normal
4
Check the hook for damage like cracks, grooves, excessive opening,
wear, torsion or other
5
Make sure the safety latch is present and closes/opens properly
6
Check the wire rope for signs of excessive wear like distortion, bird cages,
crushed sections, pinched sections, displaced or exposed core cable or
other
7
Check the wire rope for rust
8
Check the wire rope cable for broken wires; note the number and
distribution of the broken wires
9
Test the operation of all travel limiting devices
10
Check for oil leaks around and underneath the winch
11
Check if the winch makes any irregular or unusual noises during
operation
12
Make sure all nameplates and safety labels are present and legible
13
Check for broken, loose or missing structural components like fasteners,
brackets, link, anchors and others
